RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Metso Lokotrack LT1213S with Dual Stage Feeder, Unit #790

#78930

Equipment As Follows:

 

Basic

  • Equipment module-Vibrating feeder under crusher
  • Working lights-Halogen lights

 

Feeding Unit

  • Feeding unit-Pan feeder & scalper
    • Horizontal feeder maximizes the overall production through the efficient removal of fines from the feed material.
    • The scalper is equipped with 2 grizzly sections.
  • 1st Grizzly-Grizzly spacing 52 mm (2")
    • Upper grizzly
  • 2nd Grizzly-ZigZag 38 mm (1½")
    • Lower grizzly
  • Screen deck media-Steel cloth 35 mm (1 3/8")
    • Screen media to separate fines from feed and guide them to side conveyor. Screen mesh is mounted under the grizzlies.
  • Feed hopper-Extended 9 m³ (12 yd³)
    • Side walls are folded down for the transport. Feed hopper side walls are hydraulic operated and locked. No tools required forset up.
    • Increases the volume of the standard feed hopper. Enables the loading of the Lokotrack LT1213S either with an excavator or wheel loader and is made of wear resistant steel.
  • Side conveyor-Included (H5-4)
    • Belt conveyor for transporting the fine material to the side of the Lokotrack. The side conveyor is equipped with hydraulic drive and stop buttons both sides of the conveyor. The folding and lengthening of side conveyor is hydraulic. 

Crusher

  • Crusher-Impact crusher NP1213M
    • NP1213M impact crusher is part of the NP series horizontal shaft impact crusher range. This range features a unique combination of heavy rotor design, wear material and crushing chamber design. The design minimises maintenance time and improves all adjustment operations. NP series impact crushers deliver unbeatable performance in primary, and recycling applications.
  • Hammers-Xwin Recyx Blue
  • Hydraulic assistance-Hydraulic assistance
    • Hydraulic assistance for setting adjustment
  • Service hoist-Included
    • Lifting device for changing the crusher wear parts. Transported separately in one piece.

Power Unit

  • Diesel engine-CAT C13
    • Highly powerful and fuel efficient diesel engine.
  • Emission class-Tier 4F
    • Tier 4 Final (stage IV) emission regulated engine
  • Climate kit-Standard (-20C/-4F...35C/95F) 

Main Conveyor

  • Main conveyor-Standard with pan feeder
    • Belt conveyor for transporting the crushed material from the crusher to the discharge point. The conveyor is equipped with discharge hood, hydraulic drive and emergency stop wires on both sides of the conveyor.
  • Magnetic separator-Preparation
    • Permanent magnet to remove the iron waste from the crushed material.
    • Provision for the mounting of a magnetic separator above the main conveyor

Screening Unit

  • Screening unit-Included
    • Horizontal single deck, single shaft screen. Steel wire and rubber screen clothes available.
    • Screen module TK13-30S with H5-10 return conveyor
  • Screen media-Steel cloth 40 mm (1 37/64")

Optional Equipment

  • Interlocking-Included
    • Secondary unit material level will control the feeding of primary unit.
  • Hydraulic power take off-Included
    • For connecting the auxiliary hydraulic equipment to the hydraulic system of the Lokotrack.
  • Water spraying system-Included
    • For binding dust particles at the crusher cavity, under the crusher and at the discharge end of main conveyor.
  • Remote radio control-Included (US / 458Mhz)
    • Enables the remote control of following functions: start/stop of feeder unit, rpm adjustment of diesel engine, moving forward/reverse (tracks). Cable controller is always supplied with Lokotrack.
  • Metso Metrics System-Included
    • Remote monitoring and reporting system for Lokotrack. Consists of modem and antenna installation. Access to the monitoring and maintenance scheduling system and reporting services can be ordered with a separate service contract.