RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 36" x 125' PowerStacker, Unit #828

#1037951

On Lease

Conveyor Frame

  • Main Frame - 36" deep truss
  • Chord Angles - 4" x 3" x 1/4"
  • Lattice Members - 1 3/4" x 1 3/4" x 3/16"
  • Extra Chord Angle - Full length, from tail end to head end undercarriage pinning point

 

Drive Specifications

  • Drive - Class I single wrap
  • Gear Reducer - Falk shaft mount
  • Backstop - Installed in reducer
  • Motor - 50 HP 1800 RPM TEFC
  • V-belt Drive - With drive guard
  • Capacity - 850 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7” minus)
  • Belt Speed - 400 fpm
  • Superior Pulleys, crown faced
  • Drive Pulley - 24” diameter, 3/8” herringbone lagged drum
  • Tail Pulley - 16” diameter, Chevron® pulley
  • Snub Pulley - 16” diameter, Chevron® pulley
  • Head Pulley - 18” diameter, plain steel drum
  • Shafts - Turned and polished
  • Bearings - Rexnord, with Auto Greaser
  • Take ups - Screw type

 

Portability

  • Conveyor Splice - Hydraulic top folding head and tail, with integral belt fold keeper
  • Undercarriage - Hydraulic raise, with 7.5 hp electric pumping unit
  • Axle Type - Superior's Patented FD40 Series Axle
  • Transport Axle - Eight 11-22.5 tires on walking beam
  • Radial Axle - Four 385/65R-22.5 tires mounted on hydraulic outriggers.
  • Radial Travel - (4) 2 hp planetary drive (4-wd)
  • Fifth Wheel - For road travel, bolt on design
  • Anchor Pivot - Maintains tail end during radial travel
  • Brakes - Included with FD axle
  • Lights - Brake and directional signals
  • Mud Flaps - Included with FD axle
  • Landing Gear - Fold down, hand-crank
  • Towing Eye - Pintle type hitch

 

Conveyor Components

  • Belting -3 ply 3/16 x 1/16 330 PIW
  • Belt Splice - Factory vulcanized splice
  • Belt Retainer - Retains belt when folding conveyor
  • Primary Scraper - Superior Exterra® Primary
  • Secondary Scraper - Not included
  • V-plow - Pivot-style return belt cleaner
  • Superior Idlers - CEMA C Moxie, 5” dia. rolls, sealed for life ball bearings
  • Load Area - 20° trough, 16" spacing
  • Trough - 35° on 4' spacing
  • Returns - Steel cans, on 10' spacing
  • Radial Hopper - Sloped, 5' long, bolt on design
  • Gathering Trough - 5' long with adjustable rubber flashing

 

Additional Specifications

  • Guarding - For drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Power Supply - 480 v / 3 ph / 60 hz
  • Electrical - Control panel inlcuded; installed and wired to each on-board motor
  • Paint - 1 coat primer, 1 coat finish enamel Superior Beige
  • Idler Paint - Powder coated Superior Orange

Owner’s Manual - (1) copy included for operation, maintenance, and parts