RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 36" x 500' Zipline Conveyor, Unit #872

#1205639

Conveyor Frame

  • Head section-40' long, skid mounted, idlers are on 4' spacing, head shaft is approximately 8' above grade; broken down for shipping
  • Tail section-skid mounted, fully assembled with tail pulley, 5' gathering trough, and idlers
  • Intermediates-4" structural channel, 10' long, supported on 2' high "H" supports

 

Drive specifications

  • Drive-Class I head end
  • Gear reducer-Dodge shaft mount
  • Backstop-not included
  • Motor-75 HP 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Maximum Capacity-1000 STPH of 100 PCF material; belt speed 400 FPM; maximum 42' lift at 400' long; 10' lift at 1000' long (90% fines, 10% spherical lumps 7" minus)

 

Superior pulleys

  • Drive pulley-24" dia. crown face drum with 3/8 in. herringbone lagging
  • Tail pulley-18" dia. Chevron® wing
  • Snub pulley-18" dia. flat face drum with 1/4 in. smooth lagging
  • Bend pulleys-18" dia. flat face drum with 1/4 in. smooth lagging
  • Weight pulley-18" dia. crown face drum with 1/4 in. smooth lagging
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Gravity take-up-take-up weight by owner
  • Screw take-ups-capacity up to 6' long

 

Conveyor Components

  • Belting -Not included
  • Belt splice -not included
  • Primary scraper-Exterra® Primary Belt Cleaner
  • Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
  • Load area-20° trough, 18" spacing
  • Trough-35° on 4' spacing
  • Returns-steel rolls, on 10' spacing
  • Self-align trough-approximately 100' spacing
  • Self-align return-Navigator® return idler spaced approximately 100' apart
  • Radial hopper-5' long, sloped sides
  • Gathering trough -5' long with adjustable rubber flashing

 

Additional Specifications

  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Voltage-480 v / 3 ph / 60 hz
  • Electrical-Not included
  • Return guards-PVC guard
  • E-stop-switch with pull cable on one side
  • Discharge hood-not included
  • Conveyor covers-not included
  • Head & Tail Paint-1 coat primer, 1 coat finish enamel Superior Beige
  • Intermediates-Galvanized
  • Idler Paint-powder coated Superior Orange
  • Owner’s Manual-(1) copy in English included for operation and maintenance