RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 8' x 16' Portable Feed Hopper-HD, Unit #859

#1257799

Hopper

  • Size-8' x 16' top opening
  • Construction-fabricated with 1/4" plate, reinforced around top and bottom
  • Hopper Bands-Reinforcing ribbed bands on exterior of hopper - Front wall vertical
  • Capacity-15 cubic yards struck
  • Flow gate-Turnbuckle adjustment
  • Bottom opening-tapered, with I-beam breaker bar
  • Trough Liner-3/8" AR Weld in
  • Hopper Liner-3/8" AR Weld in
  • Grizzly- Hinged to dump to ditch side of plant.
  • Grizzly bar type-"Heavy T"
    Bars are of a "T" shape construction, AR hardox plate on top to prevent wear. Top of "T" is 2 1/2" wide
  • Grizzly Spacing-6" spacing between the grizzly bars (Must select a bar style for price to populate)
  • Grizzly raise-20 HP electric hydraulic pumping unit
  • Bi-directional Grizzly-Includes hinge tabs and cylinder tabs to allow grizzly to dump to opposite side of plant. Hydraulic cylinders and hinge pins relocated to the opposite side by user.
  • Hopper Skirting-Sheet metal side guard runs full length of hopper for protection of belt feeder, BOTH Sides
  • Frame Skirting-Sheet metal side guard runs full length of hopper, under trailer frame; front section folds up for transport. BOTH Sides

 

Belt feeder

  • Size-42" wide x 20' long
  • Frame-8" channel frame, mounted on angle rail and removable from under hopper
  • Drive-Class I head end
  • Gear reducer-Dodge shaft mount
  • Motor-20 hp, inverter duty
  • V-belt drive-with drive guard
  • Capacity-350-1200 STPH of 100 PCF material, 25° surcharge (90% fines, 10% spherical lumps 7” minus)
  • Belt speed-variable, from 25 to 100 fpm
  • Superior Idlers-CEMA C, 5" dia. Rolls, sealed for life ball bearings
  • Flat carrier-7" spacing
  • Returns-on 10' spacing

 

Discharge conveyor

  • Size-42" wide x 50' long
  • Frame-24" deep truss
  • Chord-3" x 3" x 1/4"
  • Lattice-1 1/2" x 1 1/2" x 3/16"
  • Drive-Class I head end
  • Gear reducer-Dodge shaft mount
  • Backstop-installed in reducer
  • Motor-30 hp 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Capacity-1200 STPH of 100 PCF material, 25° surcharge (90% fines, 10% lumps 7” minus)
  • Belt speed-350 fpm
  • Superior Idlers-CEMA C, 5" dia. Rolls, sealed for life ball bearings
  • Load area (main)-20° trough, 16" spacing
  • Trough-35° on 4' spacing
  • Returns-steel rolls, on 10' spacing
  • Hydraulic raise-Plumbed to Hydraulic Grizzly power unit

-Hyd Grizzly option must be taken

  • Gathering trough -5' with adjustable rubber flashing
  • Rock guard-entire length of conveyor

 

Chassis

  • Construction-Heavy duty wide flange beam
  • Axle-Tandem, with dual 11x22.5 tires
  • Landing Legs-Manual Crank-down
  • Fifth wheel-included
  • Brakes-complete air brake package
  • Lights-brake and directional signals
  • Mud flaps-installed behind transport wheels

 

Conveyor Components

Superior pulleys

  • Drive pulley-16” diameter CEMA, 3/8” herringbone lagged drum
  • Tail pulley-16” diameter, MD Chevron® pulley
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Take ups-Screw type
  • Belting-3 ply 3/16 x 1/16, 330 PIW
  • Belt splice-Flexco mechanical steel splice
  • Scraper-Superior Exterra Primary on both belt feeder and discharge conveyor

 

Additional Specifications

  • Power Supply-480 v / 3 ph / 60 hz
  • Remote control-(1) Wireless, operates grizzly dump cycle
  • Electrical-enclosure with main disconnect, circuit breaker, and controller for variable frequency drive
  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Paint-1 coat primer, 1 coat finish enamel Superior Beige
  • Idler Paint-powder coated Superior Orange
  • Owner’s Manual-(1) copy in English included for operation and maintenance