RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 36" x 500' Trailblazer Portable Groundline Conveyor, Unit #850

#1205638

Conveyor Frame

  • intermediate frame-8"x11.5lb structural channel

-welded cross members

 Drive specifications

  • Drive-Class I head end, 50HP dual drive
  • Gear reducer-Dodge shaft mount
  • Backstop-installed in (1) reducer
  • Motor-(2) 25 HP 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Capacity-1000 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 6” minus), 10' lift
  • Belt speed-400 fpm

 Superior pulleys, crown face unless stated otherwise

  • Drive pulley-30” diameter, 3/8" herringbone lagged drum
  • Snub pulley-20” diameter, 1/4” smooth lagged FF drum
  • Tail pulley-18” diameter, MD Chevron® wing pulley
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Take up-Gravity type

-3-sided fence guarding

  • Bend pulleys-18” dia., 1/4” smooth lagged MD FF drum
  • Take-up pulley-18” diameter, 1/4” smooth lagged drum
  • Take-up weight-included

 Portability

  • Conveyor splice-hinged 10' 6" sections
  • Lifting eyes-at sections that need assistance
  • Chassis frame-heavy duty wide flange beam

-dovetail removes for transport

  • Axle-tandem, dual (8)11Rx22.5 tires
  • Hitch-fifth wheel
  • Brakes-complete air brake package
  • Lights-brake and directional signals
  • Mud flaps-included
  • Landing gear-2 speed crank-down
  • Ratchet straps-(6) 4" x 27' 5400# for transport, unloading and loading conveyor
  • Supports-2' tall on 21' spacing
  • Support stand skid-stored over fifth-wheel for transport
  • Lifting eyes-on support skid

-12' 6" discharge height

 Conveyor Components

  • Belting -3-ply-3/16x1/16 330PIW
  • Belt splice -Flexco mechanical steel fasteners
  • Primary cleaner-Superior Exterra™ Primary Belt Cleaner
  • Secondary cleaner-Secondary not included
  • Return cleaner-Superior V-Plow UHMW blade
  • Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
  • Load area-20° trough, 16" spacing
  • Trough-35° on 4' spacing
  • Returns-steel rolls, on 10' spacing
  • Self Aligning-50' from ends every 100' after
  • Self Aligning Return-(3) Superior Navigator® Return Trainer
  • Receiving hopper-not included
  • Gathering trough -with adjustable rubber flashing
  • Emergency Stop -not included

 Additional Specifications

  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Electrical-Control panel and wiring not included
  • Power supply-460v / 3 ph / 60 Hz
  • Paint-1 coat primer, 1 coat enamel Superior Beige
  • Idler Paint-powder coated Superior Orange
  • Owner’s Manual-(1) copy included for operation and maintenance.