RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 42" x 70' Slide-Pac, Unit# 876

#1226614,615,616

Conveyor Frame - No top cross lattices

Trailer unit

  • Main frame-30" deep truss
  • Top Chord angles-4" x 3" x 3/8"
  • Bottom Chord angles-4" x 4" x 5/16"
  • Lattice members-2" x 2" x 3/16"

Middle and Top unit

  • Main frame-30" deep truss
  • Top Chord angles-4" x 3" x 1/4"
  • Bottom Chord angles-4" x 4" x 1/4"
  • Lattice members-2" x 2" x 3/16"
  • Roller Assembly-single set on head end for easy loading and unloading

 Drive specifications

  • Drives-Class II head end
  • Gear reducers-Dodge shaft mount
  • Backstops-installed in reducer
  • Motors-30 HP 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Capacity-1200 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7” minus)
  • Belt speed-400 fpm

Superior pulleys, crown faced

  • Drive pulleys-18” diameter, 3/8” herringbone lagged drum
  • Tail pulleys-14” diameter, MD Chevron® pulley
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Take ups-Screw type

 Portability

  • Conveyor splice-one piece truss frame
  • Towing eye-tow/lifting eye at tail

Trailer unit

  • V type axle-10'6" adjustable discharge height

-walking beam axle, non-swiveling Dual 11R-22.5 wheels and tires

  • Support legs-adjustable height folding legs
  • Fifth wheel-on trailer unit
  • Brakes-complete air system
  • Lights-brake and directional signals
  • Mud flaps-included

Middle unit

  • Strut axle-10'6" adjustable discharge height

-non-swiveling single 11-22.5 Ag wheels and tires

Top unit

  • Strut axle-12' 3" adjustable discharge height

-non-swiveling single 11-22.5 Ag wheels and tires

  • Fold down legs-Fixed height, for top & middle units

 Conveyor Components

  • Belting -3-ply 3/16 x 1/16 330 PIW
  • Belt splice -Flexco mechanical steel fasteners
  • Belt scraper-Superior Exterra Primary
  • Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
  • Mounting-recessed inside frame
  • Load area-20° trough, 16" spacing
  • Trough-35° on 4' spacing
  • Returns-steel cans, on 12' spacing
  • Skirting extension- 5' long 10" high, hinged, with 1" round bar for material shelf
  • Gathering trough -5' long with adjustable rubber flashing

 Additional Specifications

  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Power Supply-480 v / 3 ph / 60 hz
  • Electrical-Control panel and wiring included
  • Paint-1 coat primer, 1 coat finish enamel Superior Beige
  • Idler Paint-powder coated Superior Orange
  • Owner’s Manual-(1) copy included for operation, maintenance, and parts
  • Added Bracket-16"x20" power panel bracket installed