RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 36" x 70' Slide-Stac System

#1427128,129,130

Conveyor Frame - No top cross lattices

Trailer unit (TRL)

  • Main frame-30" deep truss
  • Chord angles-4" x 4" x 5/16"
  • Lattice members-2" x 2" x 3/16"

Middle unit (MID) and Top unit (TOP)

  • Main frame-30" deep truss
  • Chord angles-4" x 4" x 1/4"
  • Lattice members-2" x 2" x 3/16"
  • Roller Assembly-single set on head end for easy loading and unloading

 

Drive specifications

  • Drives-Class II head end
  • Gear reducers-Dodge shaft mount
  • Backstops-Included
  • Motors-30 HP 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Capacity-750 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7” minus)
  • Belt speed-350 fpm

Superior pulleys, crown faced

  • Drive pulleys-18” diameter, 3/8” herringbone lagged drum
  • Tail pulleys-14” diameter, MD Chevron® pulley
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Take ups-Screw type

 

Portability

  • Conveyor splice-one piece truss frame
  • Towing eye-Pintle type hitch
  • Trailer unit (TRL)
  • V type axle-Adjustable to 18 deg, telescoping axle, with swivel boxes and (8) 11R22.5 radial tires
  • Support legs-adjustable height folding legs
  • Fifth wheel-on trailer unit
  • Brakes-complete air system
  • Lights-brake and directional signals
  • Mud flaps-included

Middle unit (MID) and Top unit (TOP)

  • V type axle-Adjustable to 18 deg, swiveling single 11-22.5 Ag wheels and tires
  • Fold down legs-Fixed height, for top & middle conveyors

 

Conveyor Components

  • Belting -3 ply 3/16 x 1/16 330 PIW
  • Belt splice -Flexco mechanical steel fasteners
  • Belt scraper-Superior Exterra Primary
  • Superior Idlers-CEMA B, 5” dia. rolls, sealed for life ball bearings
  • Mounting-recessed inside frame
  • Load area-20° trough, 16" spacing
  • Trough-35° on 4' spacing
  • Returns-12' spacing
  • Skirting extension-5' long 10" high, hinged, with 1" round bar for material shelf
  • Gathering trough -5' long with adjustable rubber flashing

 

Additional Specifications

  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Power Supply-480 v / 3 ph / 60 hz
  • Electrical-Control panel and wiring not included
  • Bracket-16"x16" electrical panel bracket for customer to install electrical panel at a later date
  • Paint-1 coat primer, 1 coat finish enamel Superior Beige
  • Idler Paint-powder coated Superior Orange
  • Owner’s Manual-(1) copy included for operation, maintenance, and parts