RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 8' x 16' Portable Feed Hopper, Unit #942

#1427126

Hopper

  • Size-8' x 16' top opening
  • Construction-fabricated with 1/4" plate, reinforced around top and bottom
  • Capacity-10 cubic yards struck
  • Bottom opening-tapered, with I-beam breaker bar
  • Grizzly-Hinged to dump to ditch side of plant.
  • Grizzly Bar type-Triangular, Bars are of a triangular construction, 3/4" X 4" flat bars on top with 3/8" X 4" flat side bars
  • Grizzly Spacing-adjustable at 2” increments to 4”, 6”, or 8” opening. Standard factory setting of 6” between bars
  • Grizzly Raise-hydraulic raise, 15 HP electric hydraulic pumping unit, and electric controls
  • Bi-directional grizzly-Includes hinge tabs and cylinder tabs to allow grizzly to dump to opposite side of plant. Hydraulic cylinders and hinge pins relocated to the opposite side by user
  • Remote control-not applicable
  • Hopper Skirting-Sheet metal side guard runs full length of hopper for protection of belt feeder, BOTH Sides
  • Frame Skirting-Sheet metal side guard runs full length of hopper, under trailer frame; front section folds up for transport. BOTH Sides

Belt feeder

  • Size-36" wide x 18' long
  • Frame-8" channel frame, mounted on angle rail and removable from under hopper
  • Drive-Class I head end
  • Gear reducer-Dodge shaft mount
  • Motor-20 hp, inverter duty
  • V-belt drive-with drive guard
  • Capacity-360-1200 STPH of 100 PCF material, 25° surcharge (90% fines, 10% spherical lumps 7” minus)
  • Belt speed-variable, from 34 to 137 fpm
  • Superior Idlers-CEMA C, 5” dia. steel rolls, sealed for life ball bearings
  • Flat carrier-7" spacing
  • Returns-steel rolls, on 10' spacing

 Discharge conveyor

  • Size-42" wide x 40' long
  • Frame-24" deep truss
  • Chord-3" x 3" x 1/4"
  • Lattice-1 1/2" x 1 1/2" x 3/16"
  • Drive-Class I head end
  • Gear reducer-Dodge shaft mount
  • Backstop-installed in reducer
  • Motor-30 hp 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Capacity-1200 STPH of 100 PCF material, 25° surcharge (90% fines, 10% lumps 7” minus)
  • Belt speed-350 fpm
  • Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
  • Load area-20° trough, 12-16" spacing
  • Trough-35° on 4' spacing
  • Returns-steel rolls, on 10' spacing
  • Gathering trough-with adjustable rubber flashing
  • Rock guard-entire length of conveyor

 Conveyors Components

Superior pulleys

  • Drive pulley-14” diameter, 3/8” herringbone lagged drum
  • Tail pulley-14” diameter, MD Chevron® pulley
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Take ups-Screw type
  • Belting-3-ply 3/16 x 1/16 330 PIW
  • Belt splice-Flexco mechanical steel fasteners
  • Scraper-Superior Exterra® on Discharge Conveyor

-Superior Exterra® on Belt Feeder

 Chassis

  • Construction-Heavy duty wide flange beam
  • Axle-Single, with dual 11x22.5 tires
  • Landing Legs-manual pin adjustment
  • Fifth wheel-included
  • Brakes-complete air brake package
  • Lights-brake and directional signals
  • Mud flaps-installed behind transport wheels

 Additional Specifications

  • Power Supply-480 v / 3 ph / 60 hz
  • Electrical-enclosure with main disconnect, circuit breaker, and controller for variable frequency drive
  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Paint-1 coat primer, 1 coat finish enamel Superior Beige
  • Idler Paint-powder coated Superior Orange
  • Owner’s Manual-(1) copy in English included for operation and maintenance