RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Superior 36" x 136' Low Profile TeleStacker Unit #1067


On Lease

Conveyor frame

  • Truss design-Heavy-duty truss, designed for maximum strength / weight ratio
  • Main conveyor-80' long with 52" deep truss
  • Stinger conveyor-66' long with 36" deep truss
  • Extension-conveyor extends to 136' long with hydraulic cable winch
  • Safety stop-mechanically stops retraction in the event of cable failure


Drive specifications (Main / Stinger)

  • Drive-Class I head end
  • Gear reducers-Dodge shaft mount
  • Backstops-installed in reducers
  • Motors-40/(2) 20 HP 1800 RPM TEFC
  • V-belt drive-with drive guard
  • Capacity-1000 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7” minus)
  • Belt speed-450/600 fpm
  • Superior pulleys-
  • Drive pulleys-16” diameter, 3/8” herringbone lagged drum
  • Tail pulleys-14” diameter, CEMA Chevron® wing pulley
  • Shafts-Turned and polished
  • Bearings-Dodge
  • Take ups-Screw type



  • Undercarriage-Patented FB® Undercarriage, with hydraulic raise cylinders, 15 hp pumping unit, and covers
  • Axle type-FD 40 axle
  • Transport axle-(8) 11R-22.5 tires, tandem walking beam. 11’11” travel width.
  • Axle Jacks-not applicable
  • Linkage-slip-joint, for raising and lowering of conveyor with wheels in radial
  • Radial axle-(4) 385/65D-19.5 tires on hydraulic outriggers. 18’5” stacking width.
  • Radial travel-4-wd, 2 HP planetary drive on each wheel

-4% grade

  • Fifth wheel-included
  • Anchor pivot-counter-balanced swing down, secures tail end for radial travel
  • Brakes-complete air brake package
  • Lights-brake and directional signals
  • Mud flaps-installed behind transport wheels
  • Landing gear-one set, control valve, Honda power unit
  • Towing eye-fold down, for pit transport


Conveyor Components

  • Belting -3 ply, 3/16 x 1/16 330 PIW
  • Belt splice -Flexco mechanical steel fasteners
  • Scrapers-Superior Exterra® Primary Belt Scraper, on main and stinger
  • Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
  • Load area (main)-Superior Seal System, with 10" cartridges and steel rollers
  • Trough-35° on 4' spacing
  • Returns-steel cans, on 8' spacing
  • Self-aligning-Steel can troughing aligner on main / Superior Navigator® Trainer on stinger
  • Radial hopper-Rock box style
  • Gathering trough -6’ long with adjustable rubber flashing
  • Spray bars-not included



  • Control system-PilePro™ v12 automation - FD axle, power travel, conveyor raise, and stinger extension controlled by PLC parameters or with panel mounted switches, includes auto-level
  • PanelView™ 1000-not included
  • Slide-track-galvanized c-rail and steel wheels to deliver hydraulic hoses and electrical cords to stinger
  • flow switch-SonicScout™ ultrasonic sensor, stops power travel when belt is empty
  • Wireless remote-not included
  • Zero Speed Sensor-not included
  • Voltage-480 v / 3 ph / 60 hz
  • Electrical-enclosure with main disconnect, circuit breaker, and starters with on/off push buttons to control each electric motor


Additional Specifications

  • Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
  • Paint-1 coat primer, 1 coat finish enamel Superior Beige/Yellow Guarding
  • Idler Paint-powder coated Superior Orange
  • Patents-unit includes patents
  • Owner’s Manual-(1) copy in English included for operation and maintenance