RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

MDS M515 Mobile Trommel, Unit #1045

#M515650520

On Lease

Chassis

  • Main Chassis - Web and Flange Chassis integrating all components in a Monocoque Design
  • Safety Guards – To ISO Standards
  • Material – Mild Steel, S275
  • Hydraulic raise to elevate conveyor discharge points

 Hopper

  • Type – Hardox heavy duty steel pan reciprocating feeder
  • Dimensions – 36” wide x 12’ 6” feeder plate
  • Drive – Hydraulic variable speed drive via hydraulic cylinder
  • Speeds – Up to 8 strokes per minute
  • Opening – Wide mouth opening
  • Capacity – 16.5yd³
  • Tripping Grid spacing – 18” to 24”
  • Feed rate – 350-500 tons

 Trommel Drum

  • Diameter – 5’
  • Length – 18’
  • Incline angle – 5 Degrees
  • Welded Drum – 5’ x 13’ Fully welded drum sections with 6” square opening for a more robust screening and higher output
  • Mid Product Section – Removable screen sections to allow the customer to change sizes and repair or replace individual sections
  • Support rollers – 4 support rollers constructed out of steel, mounted in cradle through spindle
  • Support roller paths – Manufactured from high quality steel, welded to the barrel to give uniform solid support, machined face for smooth rolling motion
  • Screen Drive – Hydraulic motor with toothed sprocket and chain drive
  • Drive Base – Fabricated base, mounted into the underframe

 Included Option

  • Drum Cleaner – Innovative solution to clean drums off any sticky material. Made using Polyethylene. Springs loaded so not to reduce productivity of drum.

Conveyors

Fines Conveyor       

  • Width - 3’ 11”
  • Material - Heavy Duty Belt
  • Location - feeding to the rear of the machine
  • Output height - 12’ 8”
  • Drive - Single Hub Hydraulic
  • Max Rock Size - 1” to 8”

Mid Product Conveyor       

  • Width - 3’ 3”
  • Material - US Flex Dunlop
  • Location - feeding to the side of the machine
  • Output height - 11’ 4”
  • Drive - Single Hub
  • Max Rock Size - 18”

 Oversize Conveyor  

  • Width - 3’ 11”
  • Material - US Flex Dunlop
  • Location - feeding to the front of the machine
  • Output height - 12’ 5”
  • Drive - Single Hub Hydraulic Drive
  • Max Rock Size - 32”

 

Diesel Hydraulic Power Unit

  • Engine – 96kW (129HP) CAT4.4 Engine driven Hydraulic Power Unit
  • Tanks – Hydraulic and Diesel
  • Cooling – Oil Cooler
  • Direction Valve – CTOP 5 24V
  • Oil Cooler Valve – CTOP 3 24V
  • Reservoir – 300 Litre Hydraulic Reservoir
  • Reservoir Accessories – 2 off site oil gauges
  • Electric switches for low level cut off
  • Temperature probe
  • Filler breather cap
  • Return-line filters
  • Suction filters and low-pressure ball valves
  • Engine Control Panel – Electric Control panel for Engine
  • Functions – Start/Stop for Engine
    • Operational controls for drum, feeder, and conveyors
  • Safety – Limit Switches and Emergency Stops
  • Protections – Rain proof and Ventilated Panel