RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Used Atlas Copco PAC H108 JD Pump Unit #1133

#HOP066167

PAC Head Series

The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the enclosed impeller, the PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency.

 

Applications

The PAC H108 Atlas Copco pump is designed to withstand toughest applications and

delivers best in class pumping efficiency. One of the most common area of utilization is the mining and Oil & Gas segment where reliability, efficiency and versatility is the key to provide a customized solution. Other suitable applications within Construction and General dewatering, Municipal as well as General Industry are ideal for the PAC H108 pump. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.

 

Benefits

  • Efficiency

The 17” impeller with 82% efficiency at B.E.P. provides best pumping results with minimal efforts

  • Solids Handling

Closed impeller type with solids handling capability of 3.5” for trouble free operation

  • Foot Print

Best in class foot print for the transport of 3x PAC H108 pumps on same trailer

  • Serviceability

Semi cartridge seal and bolted front wear ring for easy service

  • Polyethylene Fuel Take

Corrosion-free PE tank provide longer lifetime and avoids tank cleaning due to oxidation

 

Pump

Model - PAC H108

Qmax - 6,400 USgpm

Hmax - 360 ft

Q max eff. - 4,270 USgpm

Eff. Max - 82 %

Suction port - 10" Flange - ANSI class 150

Delivery port - 8" Flange - ANSI class 150

Impeller type - Closed, 2 vane

Impeller diameter - 17"

Solids handling - 3.5"

Casing - ASTM A536 ductile iron

Impeller - ASTM A743 CA6NM

Wear ring - ASTM A48 Class 20 grey iron

Wear plate - ASTM A48 Class 20 Grey Iron + NBR rubber coating

Shaft - AISI 630 stainless steel

Mechanical Seal faces - Silicon carbide Vs Silicon carbide

Elastomers - VITON

Check Valve - ASTM A536 ductile iron + NBR rubber flap

Separator - Steel

 

Priming system

Vacuum pump type - Diaphragm

Nominal air capacity - 50.0 cfm

Max vacuum - 26.6 inHg

Drives - Link belt

 

Engine

Make - John Deere

Model - 6090HFC09

Type - Diesel turbo common rail

Displacement - 549 in³

No. cylinders - 6

Cooling - Liquid with radiator

Rpm type - Variable

Max operating speed - 1800 rpm

US emissions - EPA Tier 4F

Starting - Electric

Engine system - Voltage 24 V

Engine Power - rating 325 HP

 

Control panel

Model - PW 750

Manual operation

Automatic operation: start-stop with transducers or floats

FleetLink Optional

 

Arrangement

Material - ASTM A36 steel

Coatings - Epoxy powder, average thickness of 3 MIL

Features - Lifting beam. Fork lift pockets. Pump access through hinged door. Protected PE fuel tank.

Battery - Acid charge Pb-Ca maintenance free, 24V - 1100 CCA

Fuel tank capacity - 250 USG

DEF tank capacity - 14.8 USG

Fuel consumption - 14.7 US Gal/hr @1,800 rpm @82% eff.

Dry weight - 11,375 lbs

Wet weight - 13,400 lbs