Superior 36" x 70' Slide-Stac System Unit 1162
#1948859,860,861

Equipment As Follows:
Conveyor Frame - No top cross lattices
Trailer unit (TRL)
Main frame - 30" deep truss
Chord angles - 4" x 4" x 5/16"
Lattice members - 2" x 2" x 3/16"
Middle unit (MID) and Top unit (TOP)
Main frame - 30" deep truss
Chord angles - 4" x 4" x 1/4"
Lattice members - 2" x 2" x 3/16"
Roller Assembly - Single set on head end for easy loading and unloading
Drive specifications
Drives - Class I head end
Gear reducers - Dodge shaft mount
Backstops - Included
Motors - 25 HP 1800 RPM TEFC
V-belt drive - With drive guard
Capacity - 750 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 6” minus)
Belt speed - 350 fpm
Superior pulleys, crown faced
Drive pulleys - 18” diameter, 3/8” herringbone lagged drum
Tail pulleys - 14” diameter, CEMA Chevron® pulley
Shafts - Turned and polished
Bearings - Dodge
Take ups - Screw type
Portability
Conveyor splice - One piece truss frame
Towing eye - Equipped with Superior Titanium Spinguard® seal
Trailer unit (TRL)
V type axle - Adjustable to 18 deg, telescoping axle, with swivel boxes and (8) 11R22.5 radial tires
Support legs - Adjustable height folding legs
Fifth wheel - On trailer unit
Brakes - Complete air system
Lights - Brake and directional signals
Mud flaps - Included
Middle unit (MID) and Top unit (TOP)
V type axle - Adjustable to 18 deg, swiveling single 11-22.5 Ag wheels and tires
Fold down legs - Fold down legs for Mid and Top Unit
Conveyor Components
Belting - 3 ply 3/16 x 1/16 330 PIW
Belt splice - Flexco mechanical steel fasteners
Belt scraper - Superior Exterra Primary
Superior Idlers - CEMA C, 5” dia. rolls, sealed for life ball bearings
Mounting - Recessed inside frame
Load area - 20° trough, 16" spacing
Trough - 35° on 4' spacing
Returns - 12' spacing
Skirting extension - 5' long 10" high, hinged, with 1" round bar for material shelf
Gathering trough - 5' long with adjustable rubber flashing
Additional Specifications
Guarding - For drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
Power Supply - 480 v / 3 ph / 60 hz
Electrical panel - Electrical Panel included for each unit (3) wired, with starter for each motor.
Paint - 1 coat primer, 1 coat finish enamel
Guard Paint - Safety Yellow
Idler Paint - Powder coated Superior Orange
Owner’s Manual - (1) copy included for operation, maintenance, and parts