Metso HP400 Cone Crusher Unit #1168
Industry - Construction
Lubrication unit – Included
- The lubrication unit contains air-oil cooler, which keeps oil temperature ideal for the bearing lubrication .The hydraulic unit helps during the setting and maintenance operations.
Control type – Digital
- If Metso automation is not included. Digital signals available (switches).
- Inductive detector for adjustment setting
- Temperature and pressure for start and stop authorizations Motor starters are not delivered.
Norm - UL
Frequency – 60
- Frequency band for crusher, lubrication & hydraulic unit, air cooler and blower motors.
Lubrication unit voltage - 265/460V
- Main voltage for lubrication & hydraulic unit, air cooler, blower motors and heaters.
Serial number plate material- Aluminum
- Material of the crusher, lubrication & hydraulic unit and automation identification plates.
Color - Metso beige
- Color of the crusher and lubrication & hydraulic unit.
Instruction plate language- English
- Language of the warning stickers.
Crusher eccentricity- Standard
Main frame liner- Standard
Hydraulic motor location - Right to countershaft
Crusher cavity- Included
- For more details about crusher cavity, see Specification Crusher's liners are included and installed.
Cavity type- Standard coarse
- For more details about crusher cavity type, see Specification
Motor position- Standard btw 8 and 4 o'clock
- Crusher motor installed between 8 and 4 o'clock.
Drive- Single drive
- For more details, see technical specification.
- A single drive configuration provides installation for a single electric motor.
Accumulator certification- Standard
- Standard certification (CE, ASME, CRN, SELO, AS12100)
Ambient temperature- Normal condition down to -15°C
- Lowest accepted ambient temperature.
- Acceptable minimum temperature is -15°C (5°F)
Crusher pulley- Included
- Crusher pulley and hub.
Grooves type- 8V
- Profile used for the crusher pulley, motor pulley and V-Belts
Quantity of motors- 1
Motor pulley – Included
- Motor pulley and hub.
Motor supplier- Customer
- Crusher motor. For more details, see technical specification.
- If installed on METSO frame, compatibility have to be checked.
Motor speed/ Pole number- 4 (1500rpm 50Hz/1800rpm 60Hz)
Countershaft speed- 950
Crusher pulley size- 762
Motor pulley size- 406 mm
- 0 in
Pulley drive shaft diameter- 90 mm
- Dimension "D". If motor pulley is installed on motor shaft, see Picture. Shaft diameter if motor pulley is installed on jack-shaft drive.
Accumulator charging kit- Included
- Tool to check the pressure inside the accumulator and to connect the inflator head to the reducing valve. Parts delivered:
- Inflator head
- Hose (to connect the inflator head to the reducing valve)
- Connectors (to connect the inflator head to the accumulators)
- Connector specific to customer country (to adapt and connect hose to the reducing valve)
Connection type- "NPT"
- Connection type of the main return line (between the crusher and lubrication & hydraulic unit).
Cooling medium- Air
- Type of cooler
- Air / oil cooler
Cooler type- Air cooler up to 40°C
- The highest ambient temperature.
- For this ambient temperature 40°C (104°F), METSO delivers a standard cooler.
Quantity of cooler motors- 1
Cooler location- On frame
- Location of the air / oil cooler
- Air / oil cooler delivered on frame with hose between lubrication & hydraulic unit and cooler