Superior 42x70 Slide-Pac System Unit #1166
#1948874, 875, 876
Conveyor Frame - No top cross lattices
Trailer unit:
Main frame-30" deep truss
Top Chord angles- 4" x 3" x 3/8"
Bottom Chord angles- 4" x 4" x 5/16"
Lattice members- 2" x 2" x 3/16"
Middle and Top unit:
Main frame-30" deep truss
Top Chord angles- 4" x 3" x 1/4"
Bottom Chord angles- 4" x 4" x 1/4"
Lattice members- 2" x 2" x 3/16"
Roller Assembly-single set on head end for easy loading and unloading
Drive specifications
Drives-Class I head end
Gear reducers-Dodge shaft mount
Backstops-installed in reducer
Motors-30 HP 1800 RPM TEFC
V-belt drive-with drive guard
Capacity-1200 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 7” minus)
Belt speed-400 fpm
Superior pulleys, crown faced
Drive pulleys-18” diameter, 3/8” herringbone lagged drum
Tail pulleys-14” diameter, CEMA Chevron® pulley
Shafts-Turned and polished
Bearings-Dodge
Take ups-Screw type
Portability
Conveyor splice-one piece truss frame
Towing eye-Pintle type hitch
Trailer unit-
V type axle- 10'6" adjustable discharge height walking beam axle, non-swiveling Dual 11R-22.5 wheels and tires
Support legs-adjustable height folding legs
Fifth wheel-on trailer unit
Brakes-complete air system
Lights-brake and directional signals
Mud flaps-included
Middle unit:
Strut axle-10'6" adjustable discharge height non-swiveling single 11-22.5 Ag wheels and tires
Top unit:
Strut axle-12' 3" adjustable discharge height non-swiveling single 11-22.5 Ag wheels and tires
Fold down legs-Fixed height, for top & middle units
Conveyor Components
Belting -3-ply 3/16 x 1/16 330 PIW
Belt splice -Flexco mechanical steel fasteners
Belt scraper-Superior Exterra Primary
Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
Mounting-recessed inside frame
Load area-20° trough, 16" spacing
Trough-35° on 4' spacing
Returns-impacts, on 12' spacing
Skirting extension- 5' long 10" high, hinged, with 1" round bar for material shelf
Gathering trough -5' long with adjustable rubber flashing
Additional Specifications
Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
Power Supply-480 v / 3 ph / 60 hz
Electrical panel-Electrical Panel included for each unit (3) wired, with starter for each motor.
Paint-1 coat primer, 1 coat finish enamel Superior Beige 12-00619
Guard Paint-Safety Yellow
Idler Paint-powder coated Superior Orange
Owner’s Manual-(1) copy included for operation, maintenance, and parts
Additional Specifications included in Price
Electrical panel-Electrical Panel included for each unit (3) wired, with starter for each motor.