RB Scott: Equipment, Wear Parts, Service

Connect With Us Facebook

Your process equipment and wear parts specialists

Used Superior 8x16 Portable Feeder Hopper Unit #1304

#2240564

On Lease ON LEASE 

Carrier Chassis

Construction-Heavy duty wide flange beam

Axle-Single, with dual 11x22.5 tires

Landing Legs-Crank-down

Fifth wheel-included

Brakes-complete air brake package

Lights-brake and directional signals

Mud flaps-installed behind transport wheels

Frame Skirting-Not Included

Sign Plate-RB Scott sign plate installed

 

Hopper Specifications

Hopper size-8' x 16' top opening

Hopper construction-fabricated with 1/4" plate, reinforced around top and bottom

Hopper capacity-10 cubic yards struck

Bottom opening-tapered, with I-beam breaker bar

Hopper Skirting-Sheet metal side guard runs full length of hopper for protection of belt feeder, BOTH Sides

Grizzly Configuration

Grizzly bars-Triangle bars; 3/4" x 4" flat bars on top with 3/8" x 4" flat side bars, adjustable spacing

Grizzly dump-Grizzly raises and lowers hydraulically, 15hp electric pumping unit, electrical controls

Bar spacing-6" Spacing between grizzly bars

Self relieving-Every other bar is self-relieving

Bi-directional-Not included

Remote control-Included

 

Belt Feeder

Belt feeder size-36" wide x 18' long

Belt feeder drive-Class I head end

Belt feeder gear reducer-Dodge shaft mount

Belt feeder motor-15 HP

Belt feeder v-belt drive-with drive guard

Belt feeder capacity-250-850 STPH of 100 PCF material, 25° surcharge (90% fines, 10% spherical lumps 4” minus)

Belt feeder speed-Variable, from 24 to 95 FPM

Belt feeder idlers-Superior CEMA C, 5” dia. steel rolls, sealed for life ball bearings

Flat carrier-7" spacing

Belt feeder returns-Steel rolls, on 10' spacing

Belt feeder scraper-Superior Exterra® Primary

 

Discharge Conveyor

Size-36" wide x 40' long

Drive-Class I head end

Back stop-Insalled in reducer

Motor-20 hp

V-belt drive-With drive guard

Capacity-850 STPH of 100 PCF material, 25° surcharge (90% fines, 10% lumps 4” minus)

Belt speed-350 fpm

Idlers-Superior CEMA B, 5” dia. rolls, sealed for life ball bearings

Load area-20° trough, 12-16" spacing

Trough-35° on 4' spacing

Returns-Steel rolls, on 10' spacing

Gathering trough-With adjustable rubber flashing

Rock guard-Entire length of conveyor

Belt Scraper-Not included

Raise-Manual

Guarding-For drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.

 

Conveyor Components

Drive pulley-14” diameter, 3/8” herringbone lagged drum

Tail pulley-14” diameter, MD Chevron® pulley

Shafts-Turned and polished

Bearings-Dodge

Take ups-Screw type

Belting-3-ply 3/16 x 1/16 330 PIW

Belt splice-Factory vulcanized splice

 

Electrical Specifications

Voltage-480 v / 3 ph / 60 hz

Electrical-enclosure with main disconnect, circuit breaker, and controller for variable frequency drive

 

Paint

Paint-Superior Beige 12-00619

Guarding-Safety yellow

 

 

 

On-Site Start-up, Training and Warranty Commissioning

  • RB Scott will supply a field service technician to complete startup