Used 2016 Metso Lokotrack LT1213S Unit #1387
SN: #78704
Equipment As Follows:
Feeding Unit
- Feeding Unit – Grizzly feeder
- The vibrating feeder is equipped with 2 grizzly sections
- Horizontal feeder maximizes the overall production through the efficient removal of fines from the feed material
- 1st Grizzly – ZigZag 38mm (1 ½”)
- Upper grizzly
- 2nd Grizzly – ZigZag 38mm (1 ½”)
- Lower grizzly
- Screen Deck Media – Steel cloth 35mm (1 3/8”)
- Screen media to separate fines from feed and guide them to side conveyor. Screen mesh is mounted under the grizzlies
- Feed Hopper – Extended 9 m³ (12yrd³)
- Increases the volume of the standard feed hopper. Enables the loading either with an excavator or wheel loader and is made of wear resistant steel
- Side walls are folded down for the transport
- Feed hopper side walls are hydraulic operated and locked
- No tools required for set up
- Side Conveyor – Included (H5-4)
- Belt conveyor for transporting the fine material to the left or right hand side of the Lokotrack
- The side conveyor is equipped with hydraulic drive and safety trip wires on both sides of the conveyor
- Belt conveyor for transporting the fine material to the side of the Lokotrack
- The side conveyor is equipped with hydraulic drive and stop buttons both sides of the conveyor
- The folding and lengthening of side conveyor is hydraulic
Crusher
- Crusher – Impact crusher NP1213M
- NP1213M impact crusher is part of the NP series horizontal shaft impact crusher range
- This range features a unique combination of heavy rotor design, wear material and crushing chamber design
- The design minimizes maintenance time and improves all adjustment operations
- NP series impact crushers deliver unbeatable performance in primary, and recycling applications
- Hammers – Martensitic Xwin
- Metal Matric Composite (MMC) blow bars with ceramic particles on wear surface and martensitic steel insert
- Suitable for general quarry and recycling applications
- Belt Protection Plate – Included
- On the fixed jaw side a plate is mounted to guide the crushed recycling material together with steel parts onto the main conveyor and to protect the belt conveyor
- Hydraulic Assistance
- Crusher setting adjusted and setting shown on IC display
- Hydraulic assistance for setting adjustment
- Service Hoist – Included
- Lifting device for changing the crusher wear parts
- Transported separately in one piece
Power Unit
- Diesel Engine – CAT C13
- Highly powerful and fuel efficient diesel engine
- Emission Class – Tier 4F
- Tier 4 Final (stage IV) emission regulated engine
- Climate Kit – Standard (-20C/-4F...35C/95F)
Main Conveyor
- Main Conveyor – Standard
- Discharge Height: 2800 mm (9 ft 2 in)
- Length: 11 m (36 ft 4 in)
- Belt Width: 1200 mm (47 in)
- Belt Speed: 2 m/s (6,6 ft/s)
- Hydraulic Motor Drive
- Belt conveyor for transporting the crushed material from the crusher to the discharge point
- The conveyor is equipped with discharge hood, hydraulic drive and emergency stop wires on both sides of the conveyor
- Magnetic Separator – Standard Magnet
- Permanent magnet to remove the iron waste from the crushed material
Screening Unit
- Screening Unit – 5’x12’
- Screen module TK13-30S with H5-10 return conveyor
- Horizontal single deck, single shaft screen
- Steel wire and rubber screen clothes available
- Screen Media - Steel cloth 40 mm (1 37/64")
- Screen width- 57 7/8” ICW
- Screen length- 12’
- Hook type- L2
- Hook direction- Hooks up
- Panels per deck- 4
- Panel size- Qty (4) 57.5” x 34.5”
Optional Equipment
- Interlocking – Included
- Secondary unit material level will control the feeding of primary unit
- Hydraulic Power Take Off – Included
- For connecting the auxiliary hydraulic equipment to the hydraulic system of the Lokotrack
- Water Spraying System – Included
- For binding dust particles at the crusher cavity, under the crusher and at the discharge end of main conveyor
- Remote Radio Control – Included (US / 458Mhz)
- Remote radio controller for the main functions
- Enables the remote control of following functions: start/stop of feeder unit, rpm adjustment of diesel engine, moving forward/reverse (tracks)
- Cable controller is always supplied with Lokotrack
- Halogen Lights
Finishing
- Color – Metso Beige
- Safety Labels – ANSI
Documentation
- Quantity of Printed Manuals – 1